12
308986
Installation
Available Accessories (Cont’d)
On the hydraulic return line (D), install the following
accessories in the order shown in Fig. 3, using adapt-
ers as necessary.
f.
shutoff valve (R): to isolate the pump for serv-
icing.
g.
Filter (S): 10 micron size.
Install the following accessories in the order shown in
Fig. 3, using adapters as necessary.
WARNING
A fluid drain valve (L) is required in both fluid lines
to the gun, to help reduce the risk of serious injury,
including splashing of fluid in the eyes or on the
skin.
The fluid drain valve assists in relieving fluid pres-
sure in the displacement pump, hose, and spray
gun. Triggering the gun to relieve pressure may not
be sufficient.
h.
Fluid drain valves (L): are required in your
system to relieve fluid pressure in the hose
and gun (see the
WARNING
above).
5.
Fluid hoses:
use only grounded fluid hoses.
6.
Hydraulic Power Supply or Air compres-
sor:
follow manufacturer’s recommendations.
7.
Spray gun or dispensing valve:
grounding is
obtained through connection to a properly
grounded fluid hose and pump.
8.
Fluid supply container:
according to local code.
9.
Object being sprayed:
according to your local
code.
10.
All solvent pails used when flushing
,
according
to local code. Use only metal pails, which are con-
ductive, placed on a grounded surface. Do not place
the pail on a nonconductive surface, such as paper
or cardboard, which interrupts the grounding continu-
ity.
11.
To maintain grounding continuity when flush-
ing or relieving pressure
,
always hold a metal
part of the dispensing unit firmly to the side of a
grounded metal
pail, then trigger the dispensing
unit.
Summary of Contents for HYDRA-CAT FIXED RATIO
Page 38: ...38 308986 Notes...
Page 39: ...308986 39 Notes...
