Graco HTX 2030, Operation Manual

Page: 14 / 28

Setup
14 313888E
5. Turn on/off switch OFF and turn drain valve knob to
SPRAY.
6. Turn on/off switch ON, and run pump until a steady
stream of material flows from material hose. Turn
on/off switch to OFF and turn drain valve knob to
DRAIN.
7. Connect applicator to material hose.
Spray With Airless Tip
1. Install filter and tip extension.
2. Insert metal seat and OneSeal. Insert Switch Tip.
Screw assembly onto applicator.
3. Turn drain valve to SPRAY, and turn on/off switch to
ON. Turn pump control knob clockwise and/or
adjust engine speed until desired material delivery
rate is achieved.
4. Spray test pattern. Aim applicator at floor. Turn
applicator switch ON and move applicator to spray
surface.
ti10796b
ti13649a
ti21038a
ti13648a
ti13650a
ti8794a
ti13651a
ti21042a