Graco HTX 2030, Operation Manual

Page: 24 / 28

Maintenance
24 313888E
Maintenance
DAILY
• Check engine oil level and fill as necessary
• Check hose for wear and damage
• Check that all hose fittings are secure
• Check gun safety for proper operation
• Check and fill the gas tank
• Check level of TSL in displacement pump packing
nut. Fill nut, if necessary. Keep TSL in nut to help
prevent fluid buildup on piston rod and premature
wear of packings and pump corrosion.
AFTER FIRST 20 HOURS OF OPERATION
• Drain engine oil and refill with clean oil. Reference
Honda Engines Owner’s Manual for correct oil vis-
cosity.
WEEKLY
• Remove engine air filter cover and clean element.
Replace element if necessary. If operating in an
unusually dusty environment, check filter daily and
replace (if necessary).
Replacement elements can be purchased from your
local Honda dealer.
AFTER EACH 100 HOURS OF OPERATION
• Change engine oil. Reference Honda Engines
Owner’s Manual for correct oil viscosity.
SPARK PLUG
Use only BPR6ES (NGK) or W20EPR-U (NIPPON-
DENSO) plug. Gap plug to 0.028 to 0.031 in. (0.7 to 0.8
mm). Use spark plug wrench when installing and remov-
ing plug.
ENGINE OIL FUNNEL
• Use the supplied engine oil funnel when draining oil.
NOTICE
For detailed engine maintenance and specifications,
refer to separate Honda Engines Owner’s Manual
(supplied).
ti6200a