Graco EM 238-451 Instructions And Parts List Download Page 20

The Graco Electronic Dispense Valve

Warranty and Disclaimers 

Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship on the date
of sale by an authorized Graco distributor to the original purchaser for use.  As purchaser’s sole remedy for breach of this warranty,
Graco will, for a period of two (2) years from the date of sale, repair or replace any part of the equipment proven defective, with the
exception of defects in the electronic meter control, including the battery, which will be repaired or replaced for twelve (12) months from
the date of sale.  This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s
written recommendations.

This warranty does not cover, and Graco shall not be liable for, any malfunction, damage or wear caused by faulty installation,
misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts.  Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility with Graco
equipment of structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture,
installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for
verification of the claim.  If the claimed defect is verified, Graco will repair or replace free of charge any defective parts.  The equipment
will be returned to the original purchaser transportation prepaid.  If inspection of the equipment does not disclose any defect in material
or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor and transportation.

Disclaimers and Limitations.  The terms of this warranty constitute purchaser’s sole and exclusive remedy and are in lieu of any other
warranties (express or implied), including warranty of merchantability or warranty of fitness for a particular purpose, and of any
non-contractual liabilities, including product liabilities, based on negligence or strict liability.  Every form of liability for direct, special or
consequential damages or loss is expressly excluded and denied.  In no case shall Graco’s liability exceed the amount of the purchase
price.  Any action for breach of warranty must be brought within three (3) years of the date of sale

.

Equipment not covered by Graco Warranty.  Graco makes no warranty, and disclaims all implied warranties of merchantability
and fitness for a particular purpose
, with respect to accessories, equipment, materials, or components sold but not manufactured
by Graco

.  

These items sold, but not manufactured by Graco (such as electric motor, switches, hose, etc.) are subject to the warranty, if

any, of their manufacturer.  Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.

Graco Phone Number

TO PLACE AN ORDER, contact your Graco distributor, or call this number to identify the distributor closest to you:
1–800–367–4023 Toll Free

Sales Offices: Atlanta, Chicago, Detroit, Los Angeles

Foreign Offices: Belgium, Canada, England, Korea, Switzerland, France, Germany, Hong Kong, Japan

GRACO INC.

P.O. BOX 1441

MINNEAPOLIS, MN

55440–1441

PRINTED IN U.S.A.   308–487   May 1996

Summary of Contents for EM 238-451





















Reviews: