Graco EM 238-451, Instructions And Parts List

Page: 10 / 20

Operation
3. Press the Total button again.
The resettable total amount is shown on the
display in the current units, as shown below.
00000
R-TOTAL
GAL
4. Press the Total button again.
The calibration factor is shown on the display, as
shown below.
06815
CAL
5. Press the Reset button.
The unit returns to Normal mode, and the Normal
mode display is shown.
Error Codes
If, after a dispensing cycle, you see an error code on
the display, as shown below, see the Error Codes
section of the Troubleshooting chart on page 13. If
an error code is shown on the display, you can press
the Reset button to clear the error code and see the
dispensed amount. Even in an error condition, the unit
keeps track of the amount dispensed.
Err 1