Setup
16
3A6165J
5. Attach the fluid outlet hoses to the pump outlets (K).
Adapter fittings may be required, see
6. Connect the outlet hoses to the dispense valve.
Refer to your dispense valve component manual for
complete installation instructions.
7. Pressure check the hoses. If there are no leaks,
secure the outlet hoses together to protect them
from damage.
Flushing
•
Flush out old fluid with new fluid, or flush out old
fluid with a compatible solvent before introducing
new fluid.
•
Use the lowest possible pressure when flushing.
•
All fluid components are compatible with common
solvents.
•
To flush the entire system, circulate through the dis
-
pense valve and drain valve.
K
To avoid fire and explosion, always ground equipment
and waste container. To avoid static sparking and
injury from splashing, always flush at the lowest pos
-
sible pressure.