Graco EFR, Instructions-Parts List Manual, Page: 3 / 70

Models
3A6165J 3
Models
Use the following matrix to determine the 8-digit system part number.
NOTE: To order replacement parts, see the Parts section on page 36. The digits in the matrix do not correspond to
the Ref. Nos. in the Parts drawings and lists.
* An EFR may be configured without pumps by designating “X” for both pump selections. Inlet/Outlet Fitting selec
-
tion is required to specify the fittings shipped with the system. Pumps can be purchased and assembled sepa
-
rately before placing the system into service. See the Z-Series Chemical Pumps Instructions-Parts manual.
+ EFR configurations with High-Wear pumps are only available with stainless steel Inlet/Outlet Fitting options, and
cannot be selected in combination with standard EFR pumps.
EFR
(First, Second and
Third Digits)
Digit 4 Digit 5 Digit 6 Digit 7 Digit 8
System Designator Voltage Options Control Options A Side Pump B Side Pump
Inlet/Outlet Fitting
Options
EFR
(Electric Fixed-Ratio
Proportioner)
2
240V A ADM A 5 cc A 5 cc C
Carbon and
Stainless Steel
4 480V B 10 cc B 10 cc S Stainless Steel
C 15 cc C 15 cc D
Stainless Steel
Branded
D 20 cc D 20 cc X Not Provided
E 25 cc E 25 cc
F 30 cc F 30 cc
G 35 cc G 35 cc
H 40 cc H 40 cc
I 45 cc I 45 cc
J 50 cc J 50 cc
K 60 cc K 60 cc
L 65 cc L 65 cc
M 70 cc M 70 cc
N 75 cc N 75 cc
O 80 cc O 80 cc
P 86 cc P 86 cc
Q 90 cc Q 90 cc
R 100 cc R 100 cc
S 105 cc S 105 cc
T 120 cc T 120 cc
U 140 cc U 140 cc
V 150 cc V 150 cc
W 160 cc W 160 cc
X* No Pump X* No Pump
Z 30 cc (Lube) Z 30 cc (Lube)
1+
10 cc
High-Wear
1+ 10 cc High-Wear
2+
20 cc
High-Wear
2+ 20 cc High-Wear
4+
40 cc
High-Wear
4+ 40 cc High-Wear
8+
80 cc
High-Wear
8+ 80 cc High-Wear
9+
100 cc
High-Wear
9+
100 cc
High-Wear