![background image](http://html1.mh-extra.com/html/graco/309077/309077_instructions-parts-list-manual_2251522005.webp)
5
309077
WARNING
FIRE AND EXPLOSION HAZARD
Improper grounding, poor air ventilation, open flames or sparks can cause a hazardous condition
and result in fire or explosion and serious injury.
Ground the equipment and the object being sprayed, and all other electrically conductive ob-
jects in dispense area. Proper grounding dissipates static electricity generated in the equipment.
See
Ground the System
on page 12.
Do not use this equipment with flammable liquids.
Keep the dispense area free Do not smoke in the dispense area.
If there is any static sparking while using the equipment,
stop dispensing immediately
. Identi-
fy and correct the problem.
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvent or material.
Do not smoke in the dispense area.
Extinguish all open flames or pilot lights in the dispense area.
Do not turn on or off any light switch in the dispense area.
Keep the dispense area free of debris, including solvent, rags, and gasoline.
FIRE, EXPLOSION AND ELECTRIC SHOCK HAZARD
Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition
and result in fire, explosion, or electrostatic shock and other serious injury.
Ground the equipment, the object being dispensed, and all other electrically conductive objects
in the dispense area. Proper grounding dissipates static electricity generated in the equipment.
See
Ground the System
on page 12.
Do not use this equipment with flammable liquids.
Do not stop or deflect fluid leaks with your hand, body, glove, or rag.
Keep the dispense area free of debris, including solvent, rags, and gasoline.
If there is any static sparking or you feel an electric shock while using the equipment,
stop dis-
pensing immediately
. Do not use the equipment until you have identified and and corrected
the problem.
Make sure all electrical work is performed by a qualified electrician only.
Make sure all electrical equipment is installed and operated in compliance with applicable
codes.
Make sure power is disconnected when servicing and repairing equipment.
Have any checks, installation, or service to electrical equipment performed by a qualified electri-
cian only.
Never exceed the maximum wattage of the supply unit. See the wiring diagrams in this manual
for more information.
Only use hoses that have a maximum wattage less than an equal to 1250 watts. Using hoses
with higher maximum wattage could create a runaway temperature condition.
Summary of Contents for 309077
