Operation
3A7467D
25
Standby
1. Close the abrasive ball valve (M).
2. Turn the selector valve (W) to OFF.
3. Open the pot dump valve (J) until the pot pressure
gauge reaches 0 psi.
Shutdown
1. When you have finished blasting, use the wash
feature to flush all abrasive from the blast hose. See
2. Turn the selector valve to OFF, and with the
abrasive ball valve closed, continue to blast until
water is cleared from the hose. This is to dry the
inside of the hose for storage.
3. Perform the
NOTICE
To prevent material from packing out and damaging
the blast hoses, do not shut off your air compressor
during Standby.
WLD
M
WLD
W
WLE
J
NOTICE
To prevent material from packing out and
damaging blast hose, ensure that the abrasive ball
valve is fully closed before shutting off your air
compressor.
WLD
Summary of Contents for 262960
Page 10: ...Component Identification 10 3A7467D Component Identification WL D WLL D 3 1 4 5 6 7 8 9 0 ...
Page 44: ...Parts 44 3A7467D EQ200T Parts WL F 1 Apply thread sealant to all non swivel pipe threads ...
Page 46: ...Parts 46 3A7467D EQ400T Parts 1 Apply thread sealant to all non swivel pipe threads ...
