![background image](http://html1.mh-extra.com/html/graco/262960/262960_instructions-manual_2251465035.webp)
Repair
3A7467D
35
Repair
Replace the DataTrak Battery
Replace Battery
1. Unscrew cable from the back of the reed switch
assembly.
2. Remove the cable from the two cable clips.
3. Remove the DataTrak module from the bracket.
Take the module and attached cable to a
non-hazardous location.
4. Remove the two screws on the back of the module
to access the battery.
5. Disconnect the used battery and replace it with an
approved battery.
To reduce the risk of fire and explosion, the battery
must be replaced in a non-hazardous location.
Use only an approved replacement battery (see
table). Use of an unapproved battery will void
Graco's warranty.
WLE
Approved Batteries
Energizer
®
brand alkaline #522
Varta
®
brand alkaline #4922
UltraLife
®
brand lithium #U9VL
Duracell
®
brand alkaline #MN1604
WLE
Summary of Contents for 262960
Page 10: ...Component Identification 10 3A7467D Component Identification WL D WLL D 3 1 4 5 6 7 8 9 0 ...
Page 44: ...Parts 44 3A7467D EQ200T Parts WL F 1 Apply thread sealant to all non swivel pipe threads ...
Page 46: ...Parts 46 3A7467D EQ400T Parts 1 Apply thread sealant to all non swivel pipe threads ...