![background image](http://html1.mh-extra.com/html/graco/24w482/24w482_instructions-manual_2251211009.webp)
Setup
334662B
9
Operation
Run Mode
The controller is in Run Mode providing the following cir-
cumstances are present:
•
The controller is not in SETUP MODE.
•
An Alarm is not active.
Timer Mode: Pump ON
The display indicates the amount of time remaining in
the pump cycle, counting down the Pump ON time value
(see Time Control (on:ti) ON Setup, page 7).
•
The Pump output is enabled.
•
Pump ON time is shown in MM:SS (minutes:sec-
onds).
Timer Mode: Pump OFF
The display indicates the amount of time remaining in
the pump OFF cycle, counting down the Pump OFF time
value (see Programming OFF Time Duration, page 8).
•
The Time OFF LED illuminates and the pump output
is disabled during the Pump OFF time.
•
Pump OFF time is shown in HH:MM (hours:minutes)
or MM:SS if the time remaining is less than an hour.
Test Mode
To enter Test Mode:
1.
Press the LEFT and
RIGHT ARROW
buttons together for
3 seconds.
2.
The unit will cycle ON for 45 seconds and OFF for
15 seconds until the Test Mode is exited.
3.
To exit Test Mode, press the Reset
button once.