![background image](http://html1.mh-extra.com/html/graco/24w482/24w482_instructions-manual_2251211008.webp)
Setup
8
334662B
Programming OFF TIME Duration
After setting the parameters for the Time (Ti) ON Mode,
the OFF TIME or PUMP REST CYCLE must be set up.
The LED below the OFF TIME Symbol Illu-
minates.
NOTE:
•
The HH field is a 2-digit number.
•
A leading zero (0) must be entered in the first
field if the number of hours is fewer than 10.
•
The highest number that can be set for the HH
field value is 99.
To set the OFF Time:
1.
Use the UP or DOWN ARROW to
scroll through the numerals 0-9 until
the desired number appears in the
first Hours (HH) field.
2.
Press ENTER.
The next HH number field to the right
flashes, indicating it is ready for programming.
3.
Use the UP or DOWN ARROW to
scroll through the numerals 0-9 until
the desired number appears in the
second HH field.
4.
Press the ENTER button.
The next number field to the right
flashes indicating it is ready to pro-
gram the Minutes (MM) fields.
NOTE:
•
The MM field is a 2-digit number.
•
A leading zero (0) must be entered in the first
field if the number of minutes is fewer than 10.
•
The highest number that can be set for the MM
field value is 59.
5.
Repeat steps 1 - 4 to set the MM fields.
6.
Press the ENTER button to lock in
the last MM field.
NOTE
: When the user exits SETUP
MODE:
•
The display shows the firmware version.
•
The controller goes to the beginning of a PUMP
OFF Cycle.