![background image](http://html1.mh-extra.com/html/graco/24w482/24w482_instructions-manual_2251211007.webp)
Setup
334662B
7
Setup
Entering SETUP MODE
Press both the UP and DOWN ARROW buttons
together for three seconds.
If the Grease Jockey Controller was previously set up to
require a PIN Code:
a.
Use the UP and DOWN
ARROW buttons to move
up and down through the
numbers 0-9 until the first
number in the PIN code is displayed in the field.
b.
Press the ENTER button to set
the number. The cursor auto-
matically moves to the next
number field.
c.
Repeat steps 1 and 2 for each PIN Code prompt
field.
NOTE:
•
If a button is not pushed for 1 minute, the controller
resumes operation.
•
Setting changes are not stored unless programming
is completed and setup mode is exited normally by
pressing the ENTER button.
•
A blinking dot below the HH, MM, or SS indicates
the field currently being programmed.
Programming ON Duration
•
on:ti
appears on the display identifying the function
you are programming (see below).
•
The illuminated LED below the related symbol on
the controller label also indicates the function.
•
on:ti
= Time Control, a spe-
cific duration of time elapses
Time Control (on:ti) ON Setup
1.
on:ti
is on the display.
2.
Press ENTER.
3.
To set the ON time use the UP or
DOWN ARROW to scroll through the numerals 0-5
until the desired number appears in the first Minutes
(MM) field.
NOTE:
•
The MM field is a 2-digit number.
•
A leading zero (0) must be entered in the first
field if the number of minutes is fewer than 10.
•
The highest number that can be set for the MM
field value is 59.
4.
Press the ENTER button.
The next MM number field to the right flashes, indicating
it is ready for programming.
5.
Use the UP or DOWN ARROW to scroll through the
numerals 0-9 until the desired number appears in
the second MM number field.
6.
Press the ENTER button.
The next number field to the right flashes indicating it is
ready to program the Seconds (SS) fields.
NOTE:
•
The Seconds (SS) field is a 2-digit number.
•
A leading zero (0) must be entered in the first
field if the number of seconds is fewer than 10.
•
The highest number that can be set for the SS
field value is 59.
7.
Repeat steps 3 - 6 to set the SS fields.
8.
Press the ENTER button. After you press the
ENTER button the controller automatically switches
to the OFF TIME SETUP MODE.