![background image](http://html1.mh-extra.com/html/graco/15j753/15j753_instructions-manual_2251196026.webp)
E-Flo Plus Software Update
26
311596A
5.
See F
. 11. Select “Use the following IP address.”
The default Pump IP address is 192.168.1.100.
Enter a number which differs from the default
address in only the last set of numbers, for example:
192.168.1.10. This enables the computer to connect
to the VFD. Set Subnet mask to 255.255.255.0.
6.
Press OK.
Install the Computer Software
Load the supplied CD into your computer and follow the
software installation instructions as they appear on the
screen.
Once the installation is complete, select E-Flo Plus from
the Windows Start menu.
Connect the VFD to the PC
Use a CAT 5 Ethernet Cable (D) to connect the VFD
Ethernet Module (C) to the PC. See F
F
IG
. 11
It may take 30-60 seconds for the computer to
locate the address and establish the connection.
Graco uses a Visual Basic program to display the
run screen on the computer. This software and
program is not supported by Graco.
F
IG
. 12
C
D