Features
Control panel operator convenience features:
Wide viewing angle 2 x 20 (40 character) alphanumeric
LCD and dedicated LEDs provide convenient panel
status information
Operation is programmable using a multi-function
keypad and the panel LCD or via service computer (PC)
RS-232 service port provides upload/download PC
access for panel configuration and event history logs
Software updates are via PC download
Convenient library of standard custom label terms
Standard on-board DACT provides: Contact ID, 3/1, 4/2,
BFSK, and SIA formats
WALKTEST silent or audible system test
Voltage and current for both the battery charger and the
battery can be displayed at the front panel LCD
Five Standard Initiating Device Circuits (IDCs):
Five Class B IDCs with optional expansion to ten, all
with individual zone disable
Monitor 2-wire or 4-wire initiating devices including
TrueAlarm smoke detectors
Optional Class A Adapter Module
Two Standard Notification Appliance Circuits (NACs):
Class A or Class B outputs with solid state overcurrent
protection per NAC, each rated for 2 A
Selectable for Simplex
®
SmartSync two-wire
horn/strobe control or synchronized strobe control
Standard Power Supply:
Provides 3 A maximum @ nominal 24 DC
Automatic input power selection operates with 120 VAC
or 240 VAC, 50 or 60 Hz
On-board temperature compensated battery charger for
up to 12.7 Ah batteries in cabinet (UL and ULC) and up
to 25 Ah batteries in separate cabinet (UL only)
Additional standard features:
Programmable Active Status Reminder
Two auxiliary relays
IDCs, NACs, and Relay outputs are power limited (AC
input, battery circuits, and City Circuit Module outputs
are non-power limited)
Available with beige or red cabinet
UL listed to Standard 864
Available option modules:
Door mounted 24 LED annunciator (standard on ULC
models)
3 A Expansion Power Supply with two on-board 2 A
NACs that operate the same as standard NACs
ALARM
ACK
SUPV
ACK
TROUBLE
ACK
ALARM
SILENCE
SYSTEM
RESET
FIRE
ALARM
SYSTEM
SUPERVISORY
SYSTEM
TROUBLE
ALARM
SILENCED
AC
POWER
4006-9102 (Beige) Standard Control Panel
ALARM
ACK
SUPV
ACK
TROUBLE
ACK
ALARM
SILENCE
SYSTEM
RESET
FIRE
ALARM
SYSTEM
SUPERVISORY
SYSTEM
TROUBLE
ALARM
SILENCED
AC
POWER
F i r e A l a r m A n n u n c i a t o r
CAUTION
DISCONNECT
BATTERY AND
A. C. POWER
BEFORE
SERVICING
4006-9122 (Beige) Control Panel with 24 LED Annunciator
Available option modules (Continued):
Expansion IDC module with five Class B IDCs
Class A IDC Adapter Module, City Interface Module,
and Auxiliary Relay Module
Remote LCD and LED/Switch Annunciators
Description
For areas requiring from five to ten initiating zones, the
Simplex 4006 Series fire alarm control panels provide
flexible initiating circuit monitoring, extensive
programmable control capability, and LCD annunciated
circuit-specific 20 character custom labels.
*
See page 2 for additional ULC and MEA information. This product has been approved by
the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California
Health and Safety Code. See CSFM Listing 7165-0026:318 for allowable values and/or
conditions concerning material presented in this document. It is subject to re-examination,
revision, and possible cancellation. Additional listings may be applicable, contact your local
Simplex product supplier for the latest status. Listings and approvals under Simplex Time
Recorder Co. are the property of Tyco Fire Protection Products.
LifeAlarm Fire Alarm Control Panels
UL, ULC, CSFM Listed; FM Approved;
4006 Series Fire Alarm Control Panels
MEA (NYC) Acceptance*
Providing up to Ten IDCs and Four NACs
S4006-0001-8 8/2012
