4. Press the EDIT knob to enter edit mode for the selected field, which will be indicated with a bright
gradient background
The preset recall fields are:
select desired preset number 1 – 99: Turn the EDIT knob to select the preset name / number you wish to
recall. When you have selected it, press the encoder to enter it and return to the menu.
recall: To recall the preset name / number you have selected, scroll here and press the EDIT knob. the
preset will be recalled and you will be automatically returned to the setup menu.
cancel: To cancel your preset recall, scroll here and press the EDIT knob. The preset will not be recalled
and you will be automatically returned to the setup menu.
Recalling preset 0 will restore all settings to factory defaults.
13 - preset save
All of the m108 settings, including preamp level settings, ADC and wordclock settings, mixer settings,
custom name settings etc.. can be stored into one of the 99 available presets and recalled. To save the
current m108 settings into a new preset:
1. Scroll to the setup menu item #13 'preset save' and press the EDIT encoder to enter preset save
screen ('press to config')
2. A new menu will appear, with 5 fields to navigate
3. Turn the EDIT knob to select the fields
4. The selected field will be displayed between an underline and overline and its brightness
intensified
5. Press the EDIT knob to enter edit mode for the selected field, which will be indicated with a bright
gradient background
The preset save edit fields are:
•
preset number: turn the EDIT knob to select the preset number, press to enter the channel preset
select mode, then turn the encoder to select the number 1 - 99. When you have reached the num-
ber you want use, press again to enter. You will be returned to the preset save menu.
•
name: Push here to enter the individual characters of the name. An underline cursor will appear,
which can be scrolled across the bottom of the individual character positions. Press the EDIT knob
to input the desired character. Options are: lowercase letters a-z, uppercase letters A-Z, numbers 0-
9, a space, and a dash. When you are done selecting a character, press the encoder to enter the
character and to return to the character select mode and advance to the next character you wish to
edit. When you are done, scroll to and push the left side back arrow to enter the name. There is no
auto correct.
•
save: scroll to this area and push the EDIT encoder to save your entry and return to the setup menu.
•
cancel: scroll to this area and push the EDIT encoder to cancel your preset save and return to the
setup menu.
•
reset name: scroll to this are and push the EDIT encoder to clear all previously entered characters in
the name field.
m108 Owner's Manual
page 23
