Grabo PRO-LIFTER 20, Operator'S Manual

Page: 15 / 164

15
GRABO PRO-LIFTER 20 | Operator’s manual
working conditions and the work to be
performed.
Use of the power tool for
operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of
the tool in unexpected situations.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified
by the manufacturer. A charger that
is suitable for one type of battery may
create a risk of fire when used with
another battery.
b) Use power tools only with specifically
designated battery. Use of any other
battery may create a risk of injury and fire.
c) When battery is not in use, keep it away
from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make
a connection from one terminal to
another.
Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid
ejected from the battery may cause
irritation or burns.
e) Do not use a battery or tool that
is damaged or modified. Damaged
or modified batteries may exhibit
unpredictable behaviour resulting in fire,
explosion or risk of injury.
f) Do not expose a battery or tool to fire or
excessive temperature. Exposure to fire
or temperature above 130 °C/265 °F may
cause an explosion.
g) Follow all charging instructions and do
not charge the battery or tool outside
the temperature range specified in the
instructions.
Charging improperly or at
temperatures outside the specified range
may damage the battery and increase the
risk of fire.
6) SERVICE
a) Have your power tool serviced by
a qualified repair person using only
identical replacement parts.
This will
ensure that the safety of the power tool is
maintained.
b) Never service a damaged battery. Service
of battery should only be performed by
the manufacturer or authorized service
providers.
VACUUM LIFTING DEVICE SAFETY WARNINGS
a) Do not deliberately try to rip the load
off with extreme force. There is a risk
of the load crushing feet and hands and
damaging the object and tool.
b) Do not lift objects weighing more than
170 kg (375 lbs). There is a risk the weight
can fall off.
c) Risk of load crushing feet and hands and
damaging the object and tool. Do not
shake the tool while lifting, moving and
placing objects. Do not swing or shake
the load while lifting, moving and placing
objects. Do not use the tool when the
seal is worn out. Lift and carry the load
with uniform speed without sudden sharp
and strong movements.
d) Do not use the tool while the battery is
low. There is a risk of injury and damage
to the materials being lifted.
e) If the sealing force begins to noticeably
decrease while the battery is fully
charged, check the rubber foam seal for