Grabo PRO-LIFTER 20, Operator'S Manual

Page: 20 / 164

20
NL
DK
DE
AR
FR
RU
ES
TR
IT
EN
SE
! Charge only with the charger specified by the manufacturer.
! During the process of charging, the charger can become warm: this is normal.
! Only use the charger in a dry environment. The charger is not waterproof.
! Ensure that the power supply voltage corresponds to the data on the nameplate of the
battery charger.
! Keep away from flammable objects while charging.
EXPLANATION OF VISUAL INDICATORS
GRABO® Pro-Lifter 20
Signal
Meaning
No light
The GRABO® Pro-Lifter 20 is turned off
Run status indicator is continuously red
1. The GRABO® Pro-Lifter 20 is turned on
and ready for use
2. Pressure is building up and reaching its
maximum capacity
3. Pump is switched off
Run status indicator flashes red
Pump is switched on; pressure is low and
building up
Run status indicator is continuously green
Pump is switched on but the motor is off;
pressure has reached its maximum capacity
Bar indicator on display shows 5 green bars Battery is sufficiently charged
Last bar of bar indicator on display flashes red Battery capacity is low/empty
Bar indicator on display 1 Bar = 20% full
2 Bar = 40% full
3 Bar = 60% full
4 Bar = 80% full
5 Bar = 100% full
Battery Charger
Signal
Meaning
LED is continuously red
Battery is charging
LED is continuously green
Battery is fully charged
MAINTENANCE
WARNING: Changes to the tool and technical modifications are not permitted. This can
lead to injury. If the tool fails despite the care taken in manufacturing and testing procedures,
repair shall be carried out by an after-sales service centre for the GRABO® Pro-Lifter 20.