EK-series
Video wall
www.gpodisplay.com
EK-series Video wall
How to carry the product
At least two people are required to carry the display. When
carrying the product upright, please hold the handles on the rear
as well as the bottom of the display simultaneously for stability.
When carrying the product with the panel positioned upwards as
shown below, please hold as shown in the diagram.
5
Installation Precautions
A minor gap between monitors is strongly recommended
High temperatures can cause slight expansion of panels.
If there is no space between panels, damage may occur as a
result of pressure resulting from the expansion of adjacent
panels into one another.
* Recommended gap between displays: 0.5mm - 1.3mm
If the product needs to be set upright, hold both sides of the
product, and tilt backward carefully for. Do not let the panel to
touch the floor. If the product is tilted onto the bezel, the bottom of
the panel may be damaged.
If more than 1kg of weight is applied to the top bezel of a panel
(as illustrated to the right), backlight leakage will result. This is a
sign that the panel alignment/angle must be adjusted or other
countermeasures must be applied.
When laying down the product, lay a cushion on a flat floor. Put the
product on it with the panel the product facing down.
If there is not a cushion available, ensure the floor is clean and then
lay the product down carefully with the panel facing either upward
or downward. At this time, be careful for objects not to fall on the
panel.
