EK-series
Video wall
www.gpodisplay.com
EK-series Video wall
23
OSD Menu
Network Setting - DHCP
Network → DHCP → Adjustment
•
On: Gather IP information of monitor from
the Server. (to avoid IP address conflicts.)
•
Off: User may enter IP address manually using the
video wall control program (see p. 35 of this
document for more detail).
•
Note that when “Network” is set to “Enable”, serial
communication will be disabled. When “Network” is
set to “Disable” , you may communicate with
displays via RS-232
Network Setting – Network Information
Network Setting – Save current Setting
Network → Save current setting → Adjustment
•
Write down your IP Address, Gateway, and
Subnet values and retain for future reference.
•
The use of a static IP is strongly recommended.
•
Consult with your organization’s IT specialist(s)
for more info on static IP’s.
•
After assigning Network info (IP Address,
Gateway, Subnet), select “Save Current Setting”
and then “Enter”. If you do not select “Enter”, the
settings will not be saved.
