Gow-Mac 580 series, Operating Manual

Page: 19 / 68

Series 580 TCD Gas Chromatograph
September 2017, Rev. 5 19
F. Recorder Connection
Supplied with your G.C. is a recorder cable. Both ends of the cable terminate in three spade
terminals.
Cable color code is as follows: Red lead, positive (+); black lead, negative (-), silver (shielded)
lead, ground.
1. Connect one end of the recorder cable to the terminals located at the rear of the G.C.
(Figure 3-1). Connection should be made as follows:
Black to black
Red to red
Silver to green
2. Connect the other end of the recorder cable to the proper terminals on the recorder.
GND
-
+
INLET
RECORDER
GND
-
+ I
O
Figure 3-1
Recorder Cable Connection
G. Integrator Connection
The same cable referred to above can be used for connecting an integrator to the GC.
H. Chromatography Data handling Software
The Series 580 TCD GC may also be used with a chromatography data handling software for full
data acquisition.