27
EN
produced frozen products as they have generally already been pre-fried. The
preparation time may be reduced slightly. You should therefore check whether your
food is fully cooked before the stated cooking time has expired.
• With some food (e. g. chips and similar items), it is advisable to mix the food around
from time to time to obtain an even cooking result. To do this, remove the drawer
(
5
) from the device and give the food a light shake. Then re-insert the drawer and
continue the cooking process.
Using the Device and Preparing Food
PLEASE NOTE!
■
The drawer and the basket insert will be hot after being removed from the device!
Only ever place on a heat-resistant surface!
■
Make sure that the drawer has been inserted correctly. The device cannot be swit-
ched on if the drawer is not inserted correctly.
■
Insert the drawer into the device only with the basket insert placed in it.
■
Do not over
fi
ll the basket insert so that the hot air can circulate optimally inside the
device. Fill the basket insert no more than 2/3 full.
■
Do not place food that is still packed in plastic wrap or plastic bags in the device.
■
Make sure that the food that you would like to prepare does not come into contact
with the heating elements of the device.
This device works with hot air. It is not a conventional fryer in which food is
deep-fried using lots of oil! In general, you can prepare all dishes that can
also be prepared in a conventional fan oven. For good results, please read
the “Tips” chapter.
1. Insert the basket insert (
8
) into the drawer (
5
). It must click audibly into place.
2. Pour the food that is to be prepared into the basket insert.
3. Insert the drawer containing the basket insert into the device. A beep must sound
and all elements must light up once on the display (
10
) and then go out again. The
drawer is then
fi
tted correctly in the device.
4. Switch on the device by touching the
fi
eld
(
20
). The preset temperature and
duration of the
“Manual”
programme are displayed alternately in the LED
display (
21
).
5. Use the
fi
eld
(
18
) to select the programme you want or stay on the preset
“Manual”
programme (see the “Operation” chapter | “Operating Elements and Functions”). If
necessary, adjust the temperature and the timer time individually using the relevant
+
and
–
fi
elds (see the “Operation” chapter | “Operating Elements and Functions”). The
selected programme starts automatically after approx. 5 seconds. The symbol
(
12
)
and symbol
(
23
) appear on the display to indicate that the device is heating up.
• The
“Manual”
programme must be started via the
fi
eld
.
• The temperature and the timer time can also be adjusted during the
cooking process.
