Gossen MetraWatt U1601, Operating Instructions Manual

Page: 41 / 80

Gossen Metrawatt GmbH 41
Password Menu
When the summator is shipped, all of the passwords have been deleted: any user is
able to configure parameters. If this needs to be avoided, passwords can be entered for
5 users:
Enter a password for user 1 first (master). Passwords for other users (2 through 5)
cannot be entered until the password for user 1 has been entered. After the password
for user 1 has been entered, parameters can be changed for a period of 5 minutes if
none of the keys are activated. After this time period, or after an instrument self-test,
password entry is once again required.
Each user can change his password at will.
After the user has logged on with his password, he has only 5 minutes to change his
own password, even if none of the keys have been activated during this time.
If password protection is to be cancelled for all users, user 1 (master) must enter special
password “111111”. The system deletes all passwords and parameters can be
configured by any user.
Note
For details on the parameter Password please refer to the ECL Interpreter and
Command List (3-348-870-03).
Analog Output Test
F1
F2
F3
F4
F5
NEW
User 1
User 2
User 3
User 4
User 5
PASSWORD
Entry
1.
Select
the User
Passwords consist of a combination of the F1
through F5 keys and always have 6 places.
From
Station Menu
ESC Abort
Save
Value
ANALOG
TEST: ON
0 mA
–4 mA
–10 mA
–20 mA
OUTPUT
TEST
Selection:
F
2
..Select. F
5
more:
Channel:
 
 
A-01:
–20mA
F1
F2
F3
F4
F5