2
GMC-I Messtechnik GmbH
Scope of Delivery
(depending on instrument variant)
1
METRAHIT IM XTRA
or
METRAHIT IM E-DRIVE
multimeter
with rubber holster
1
Probe with start/stop and store/send function
1
KS17-2 cable set: 1 pair of safety measurement cables,
red/black, with 4 mm test tips
1
Type KC4 Kelvin clip (1 pair with
METRAHIT IM XTRA
)
1
Type KC27 Kelvin probe (with
METRAHIT IM E-DRIVE
only)
1
Quick change, rechargeable lithium polymer battery with
micro USB charging socket
1
USB mains power pack (5 V DC, 2 A) with cable and micro
USB charging plug
1
DAkkS calibration certificate
1
Hard case for the multimeter and accessories
1
Condensed operating instructions, German/English
–
Comprehensive operating instructions in German and English
available on the Internet for download at www.gossenme-
trawatt.com
1
Card with registration key
for the software
Overview Supply
Legend
X = Standard
O = Option
— = not possible, not provided for
Overview of Included Features
1
With optional temperature sensors
2
For 300,000 measured values, sampling rate adjustable from 0.1 sec-
onds to 9 hours
Accessories (sensors, plug inserts, adapters, consumable materials)
The accessories available for your instrument are checked for
compliance with currently valid safety regulations at regular inter-
vals, and are amended as required for new applications. Currently
up-to-date accessories which are suitable for your measuring
instrument are listed on our website along with photo, order num-
ber, description and, depending upon the scope of the respective
accessory, data sheet and operating instructions:
www.gossenmetrawatt.de
Software Version
These operating instructions describe a multimeter based on soft-
ware version 1.2.6. Refer to chapter 4.4.1 in order to query the
respectively installed version number.
Current operating instructions for the latest firmware update are
available for download from our website at
www.gossenmetrawatt.com.
Please register at myGMC in order to continuously receive the lat-
est information regarding current software and firmware, as well
as instrument updates and options.
Accessories
Type
Article No.
M273S M274S
METRAHIT IM XTRA
M273D
X
METRAHIT IM E-DRIVE BT
M274B
X
LiIon module & USB charger
Z270A+
X
X
Mains module with electrical
isolation and USB charger
O
O
Remote probe
Z270S
Z270S
X
X
Cable set
KS17-2
GTY362003
P0002
X
X
1 pair Kelvin clips
KC4
Z227A
X
O
1 pair Kelvin probes
KC27
Z227B
O
O
1 Kelvin clip &
1 Kelvin probe
KC&S
Z227C
—
X
Hard case
HC40
Z270K
X
X
COIL Adapter 10 μH ,,, 50 mH COIL Adapter 50mH
Z270F
O
O
COIL Adapter 10 μH ,,, 500 mH COIL Adapter XTRA
Z270M
O
O
IZYTRONIQ
Business Starter
Licence
S101S & Z956A
S101S &
Z956A
X
X
Function
METRAHIT IM XTRA (BT)
METRAHIT IM E-DRIVE (BT)
V
DC
(Ri
9 M
)
✔
V
AC
/ Hz TRMS (Ri
9 M
)
filter
V
AC+DC
TRMS (Ri
9 M
)
filter
V
AC+DC
TRMS (Ri
1 M
)
R
ISO
range (interference voltage)
✔
Hz (V
AC
)
... 300 kHz
V
AC, AC+DC
bandwidth
100 kHz
A
DC, AC, AC+DC
/ Hz TRMS
10 nA ... 1 A
Fuse
1 A / 1000 V - 30 kA
Current sensor transformation ratio
1 mV : 1
•
10
•
100
•
1000 mA
Hz (A AC)
... 30 kHz
Insulation resistance RISO: test voltages
50
•
100
•
250
•
500
•
1000 V
Short-circuited coil test (1 kV) with COIL adapter
Option
Duty cycle measurement as %
✔
RPM measurement
✔
Resistance Rlo with 200 mA per
EN 61557 / VDE 0413
✔
Milliohm with 4-wire method, m
with 200 mA
✔
Milliohm with 4-wire method, m
with 1 A pulse
✔
Fuse
FF 1A/1000 V – 30 kA
Resistance
✔
Continuity
✔
Diode ... 5.1 V
✔
Temperature: °C/°F TC type K and Pt100/1000
1
✔
Capacitance
✔
Min-Max / data hold
✔
Test sequence
20 steps
64 MBit memory
2
✔
Bluetooth
®
interface
METRAHIT IM XTRA BT
METRAHIT IM E-DRIVE BT
WiFi interface
Option
3.5" TFT color graphic display
✔
Probe with start/stop and send/store keys
✔
Quick-change battery with USB charging
✔
Mains module with electrical isolation and USB
Option
WPC quick change battery for inductive charging
Option
Protection
IP 52
Measuring category
1000 V CAT III, 600 V CAT IV
1kHz
1kHz
