4
GMC-I Messtechnik GmbH
1
Addresses
1.1
Product Support
Technical Queries
(use, operation, software registration)
If required please contact:
GMC-I Messtechnik GmbH
Product Support Hotline
Phone
: +49 911 8602-0
Fax:
+49 911 8602-709
e-mail:[email protected]
1.2
Recalibration Service
We
calibrate
and
recalibrate
all instruments supplied by GMC-I
Messtechnik GmbH, as well as other manufacturers, at our ser-
vice center, for example after one year within the framework of
your test equipment monitoring program, as well as prior to use
etc. See also chapter 9.7.
1.3
Repair and Replacement Parts Service
Calibration Center* and Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service Center
Beuthener Straße 41
90471 Nürnberg, Germany
Phone: +49-911-817718-0
Fax:
+49-911-817718-253
e-mail: [email protected]
www.gmci-service.com
This address is only valid in Germany.
Please contact our respective representatives or subsidiaries for
service in other countries.
*
DAkkS calibration laboratory for electrical quantities, registration no.
D-K-15080-01-01, accredited per DIN EN ISO/IEC 17025
Accredited quantities: direct voltage, direct current value, direct current
resistance, alternating voltage, alternating current value, AC active pow-
er, AC apparent power, DC power, capacitance, frequency, tempera-
ture
Competent Partner
GMC-I Messtechnik GmbH is certified in accordance with
DIN EN ISO 9001.
Our DAkkS calibration laboratory is accredited by the Deutsche
Akkreditierungsstelle GmbH (national accreditation body of the
Federal Republic of Germany) under registration number
D-K-15080-01-01 in accordance with DIN EN ISO/IEC 17025.
We offer a complete range of expertise in the field of metrology:
from
test reports
and
factory calibration certificates
right on up to
DAkkS calibration certificates
.
Our spectrum of offerings is rounded out with free
test equipment
management
.
As a full service calibration laboratory, we can calibrate instru-
ments from other manufacturers as well.
