34
GMC-I Gossen-Metrawatt GmbH
17.2
Count Zero Crossings
This function counts and displays the number of times the
input signal passes through zero.
Counting can be stopped or restarted with the help of the
MAN|AUTO
key. Status is indicated with the following dis-
play:
ON
Counting activated
Counting
stopped
By briefly activating the
DATA|CLEAR
key, the current value
from the main display is entered to the sub-display and
stored to memory. The clock symbol disappears and DATA
is displayed.
By pressing and holding the
DATA|CLEAR
key, both displays
are deleted, and the original time measurement function is
restored to the sub-display.
18
Stopwatch
Time periods of up to one hour can be measured with this
function.
➭
Set the rotary switch to “V
“
➭
Select a measuring range between 3 V and 600 V with
the
MAN|AUTO
key.
Note!
☞
This function cannot be activated in the
300 mV
measuring range!
➭
Press and hold the
ESC|FUNC
key. The clock is reset, and
“
00
:
00
.
00
” and the
clock symbol are displayed at the
LCD.
➭
The clock can be started and stopped by pressing the
MAN|AUTO
key. Minutes, seconds and tenths of seconds
are displayed in digital form.
➭
By pressing the
DATA|CLEAR
key, intermediate time is cap-
tured in the left hand sub-display.
➭
Repeated activation of the
DATA|CLEAR
key moves the last
recorded intermediate time into the right hand sub-dis-
play, and updates intermediate time in the left hand sub-
display at the same time.
➭
Pressing the
MAN|AUTO
key stops the clock.
➭
If the multifunction key
ESC|FUNC
is pressed once, or if the
rotary switch is activated, the stopwatch function is
exited.
