Gossen MetraWatt B100B, Operating Instructions Manual, Page: 54 / 60

52
METRACELL BT PRO
Gossen Metrawatt GmbH
19a

A battery database has been created


18.

The battery database has been transferred to the battery tester


18.

You use RFID technology for your system.

The DUTs in the battery database are linked to the corresponding RFID tags


24.
1. Select

BATT DATAB. with the
▼
key.
2. Press the OK key
The battery database is displayed. An acoustic signal indicates that the RFID reader is
ready.
3. Read the RFID tag (


5).
An acoustic signal confirms reading and the DUT is displayed.
4. Press the OK key.

The battery is selected. The battery tester returns to the MEASUREMENTS menu.
START
-> BATT DATAB.
19b

A battery database has been created
 
18.

The battery database has been transferred to the battery tester
 
18.
1. Select

BATT DATAB. with the
▼
key.
2. Press the OK key
The battery database is displayed. An acoustic signal indicates that the RFID reader is
ready.
3. Select a battery using the
▼ ▲
keys.
4. Press the OK key.

The battery is selected and the battery tester returns to the MEASUREMENTS menu.
START
-> BATT DATAB.
19c 1. Select the LOCATION:XXXX. parameter with the
▼
key.
2. Press the OK key.
The entry mode is active.
3. Enter the parameter’s first digit


5.
4. Acknowledge your entry with the OK key.
5. Repeat steps 1 through 4 for all other parameter digits for battery number, number of
blocks and upper and lower voltage limit values.
BATT DATAB.
-> LOCATION : 0000
20 Return to START using the
▲
key. -> START
BATT DATAB.
21 Press the OK key.
The battery tester is waiting for data.
WAITING FOR DMA 35
22 Select the following function sequence at the DMA 35 : Data Memory

Export Measurement Data

OK .
A security prompt appears.
Export
Export all data?
23 Acknowledge the Export all data prompt with Yes .
24 The data are transmitted. WAITING FOR DMA 35 (re-
ceiving data).
DMA 35: Export data
25 Data are transferred from the DMA 35 to the battery tester.
The measured value evaluation is displayed at the battery tester


16.
Quantity:
[XXXX]
XX.XXXXV
MEAN: +XX.XXXXV
DMA 35:Export finished
26 Select the following keys at the density meter OK -> Back -> Back - Back.
The initial screen appears.
27 Press the OK key repeatedly in order to view the evaluation (scroll), and to subsequently return
the display to DMA35 (BT) measurement.
QUANTITY:
[XXXX]
MEAN:
X.XXXkg/l
DMA 35:Export finished