background image

11

Repair and Maintenance

Front Wheel Replacement

Battery Care and Disposal

Battery Charger

Tools required:   14mm wrench, 13mm wrench.

Do not store the battery in temperatures above 70°F (21°C) or below 32°F (0°C).

1. Using a 13mm wrench and a 14mm

wrench loosen and remove the front 

axle by

2. Reinstall new replacement wheel

ensuring to note the order and location 

of all

3. Reinstall hardware and tighten 

clockwise with a 13mm wrench and a 

14mm wrench.

THIS SCOOTER CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE ECYCLED 

IN ACCORDANCE TO YOUR LOCAL AND STATE LAWS. PLEASE CAREFULLY READ AND 

UNDERSTAND THE FOLLOWING DISPOSAL INSTRUCTIONS:

Disposal: This product contains sealed lead acid batteries which must be disposed or recycled in an environmentally safe 

manner. Do not dispose of the batteries in your household trash. Do not dispose of the batteries in a fire, this could cause 

the batteries to leak or explode. The incineration, disposal in landfill and or placing sealed lead acid batteries with ousehold 

trash is prohibited by law in most areas. Return exhausted batteries to a state or federal approved lead acid battery ecycler 

or check with your local retailer of vehicle batteries.

WARNING:

 Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable 

                        (nickel-cadmium)  batteries. Do not store the battery in temperatures above 70°F (21°C) or below 32°F (0°C).

Only use the supplied battery charger. If battery charger is damaged discontinue use immediately and replace with a 

GoSkitz

Scooter recommended battery charger.

Wheels

Wheels and drive system components are subject to normal wear and tear. It is the responsibility of the user to regularly inspect 

wheels for excess wear and adjust and replace drive train components as required. Always check and maintain proper tire inflation.

Replacement Parts

Most of the common replacement parts are available for purchase on line at http://

www.goeasyaustralia.com.au/

Repair Help

1. Check on line at http://www.

goeasyaustralia

.com

.au

/

2. Call 

1300 315 504

  to speak with a customer service representative

WARNING:

 Make sure to wash your hands after handling batteries as they contain lead compounds.

Summary of Contents for skitz 2.0


















Reviews: