3
Before You Start
WARNING:
Remove all packing and items from the display box. Make sure that the power switch is turned
“OFF” before assembling the scooter.
Estimated Assembly Time
Required Tools
• Allow up to 25 minutes for assembly, not including initial charge time.
• Allow up to 14 hours for the initial charge (see page 6 for charging information).
WARNING: DO NOT USE NON-
GoSkitz
PRODUCTS WITH YOUR
2.0
ELECTRIC SCOOTER. This scooter
has been built to specific
GoSkitz
Scooter design specifications and should not be modified. Altering of
the original components may or may not be compatible with the design and will void the warranty.
10mm/ 8mm wrench
(included)
1 (one) 13mm wrench
(not included)
1 (one) 14mm wrench
(not included)
1 (one) 12mm wrench
(not included)
4mm hex wrench
(not included)
5mm hex wrench
(included)
Phillips screw driver
(not included)
Air/tire pump with
pressure gauge for
schrader type valves
(not included)
battery charger
(included)
brake lever
throttle
reset button
charging port
charging port
on/off
switch
on/off
switch
