10
Repair and Maintenance
Chain and Rear Wheel Replacement
6. Place the chain under tensioner
wheel and onto the rear chain wheel
gear and install replacement wheel into
the frame. Do not tighten axle nuts yet.
Install brake arm hardware, do not
tighten yet.
9. Retighten brake cable pinch nut with
10mm wrench. Refer to the instructions
on page 8 for proper adjustment.
10. Reinstall side covers with a 4mm
hex wrench. Do not over tighten bolts.
7. Ensure axle hardware is seated
correctly against the frame. After
tightening axle nuts with a 14mm
wrench and a 13mm wrench check
wheel alignment and the tracking
of the chain by rotating the wheel
counter
8. Retighten the brake arm bolt with a
Phillips screwdriver & 8mm wrench.
