6
Assembly
Charging the Battery
1. Make sure power switch is in the
OFF position before plugging in the
charger. Insert charger into charging
port on the right side of the battery
box.
2. Plug the battery charger into a wall
power outlet. The light on the charger
housing should illuminate. Red LED
light indicates battery is charging and
a green LED light indicates battery is
fully charged.
WARNING:
Batteries must be fully charged before you ride your electric scooter.
Required components: Battery charger
• Initial battery charge time - 14 hours
• Recharges after initial charge - Up to 10 hours
• When scooter is not in regular use batteries need to be charg
ed on a monthly basis to maximize performance.
WARNING:
Do not use this product for the first time until you have cha
rged the battery for at least 14 hours.
Failure to follow these instructions may damage your product and void your warranty.
Note:
Do not store the battery in temperatures above 20˚F (21˚C) or below 32˚F (0˚C).
Note:
The charger has a small window with one LED light that indicates the charge status. Refer to the
illustration on the charger unit for the actual “charging” and “charged” status indication. Your charger may get
warm during use; this is normal and is no cause for concern.
Note:
Batteries must be recharged at least once a month even when the scooter is not in use. Failure to do so
may result in batteries that will no longer accept a charge.
Note:
Battery Charger should be operated by an adult.”
