Repair and Maintenance
9
Chain and Rear Wheel Replacement
1. Using a 4mm hex wrench remove
the 4 bolts from the rear axle cover on
both sides of the scooter.
4. Note the location of all rear wheel hardware and ensure to properly reinstall
all items.
2. Loosen brake cable pinch nut with
10mm wrench.
3. Remove the brake arm bolt with a
Phillips screwdriver and 8mm wrench.
Using a 14mm wrench and a 13mm
wrench, loosen the rear wheel axle
nuts. Pull up on the chain and remove
the rear wheel from the frame.
Tools required: 4mm hex wrench, 5mm hex wrench, 14mm wrench, 13mm wrench, 10mm wrench, Phillips screwdriver
5.If replacing the chain, Slide motor out
of the frame slig htly so that there is
enough room to remove/ replace the
motor gear.
