EN 20
2. Adjust the wheels (see figure 2) by screwing them
with two screws at the front of the skirting board.
Check the horizontal position of the stove using a
spirit level.
3. Place the blind plugs into the holes in the front of
the skirting board (see Figure 3).
PREVENTION FROM TIPPING OVER
(mm)
(depending on the model)
According to the plan attach the holder to the
wall with the added screws and anchors. If the
attached screws and anchors cannot be used, use
others that will ensure a secure installation on the
wall.
INSTALLATION OF THE LID
(depending on the model)
CONNECTING TO THE POWER MAINS
Make sure the power cord is not located near hot
parts and sharp edges.
If the power cord is damaged, it should be replaced
by the manufacturer or an authorized service
technician, in order to avoid hazard.
