EN 17
USING THE
„AQUA CLEAN“
FUNCTION
Turn the COOKING SYSTEM SELECTOR KNOB to
position AQUA CLEAN
. Set the
TEMPERATURE KNOB
to 70°C.
Pour 0,6 l water into a baking tray and place it in the
lower guide.
After 30 minutes, food residues on the oven enamel
walls will have softened and they will be easy to
clean with a damp cloth.
Use the
“AQUA CLEAN“
system when
the oven has fully cooled down.
REMOVING AND CLEANING WIRE AND
TELESCOPIC EXTENDIBLE GUIDES
Only use conventional cleaners to clean the guides.
Hold the guides by the bottom side and pull them
towards the center of the oven cavity.
Remove them from the openings at the top.
Do not clean the extendible guides in
the dishwasher.
INSTALLING THE CATALYTIC INSERTS
Only use conventional cleaners to clean the guides.
Remove the wire guides or extendible guides.
(depending on the model)
Mount catalytic inserts onto the wire guides. The
upper part of the guides must be mounted into the
upper openings "A" in the catalytic inserts.
Place the wire guides with the catalytic inserts on the
upper openings in the side walls of the o
ven “A“.
Press them into the snap lock at the bottom “B“.
Do not wash the catalytic inserts in the
dishwasher.
REPLACING THE BULB
The bulb is a consumable and therefore not covered
by warranty. Before changing the bulb, remove the
trays, the grid, and the guides.
Disconnect the appliance from the power mains!
Undo the bulb cover and pull out or undo the bulb.
Halogen lamp: G9, 230 V, 25 W. (regular bulb E14,
230 V, 25 W - depending on the model)
Use protection to avoid burns
.
COMFORT DOOR CLOSING
(depending on the model)
Cookers are equipped with new secure door hinges
COMFORT. These special hinges guarantee very
quiet and gentle closing of the oven door.
If the force applied to close the door is
too strong, the efficiency of the system
can be reduced or the system's safety
can be affected.
DOOR LOCK
(depending on the model)
Open the door lock by gently pushing it to the right
with your thumb while simultaneously pulling the door
outwards.
When the oven door is closed, the door
lock automatically returns to the initial
position.
REMOVING AND REPLACING THE OVEN
DOOR
(depending on the model)
1. Open the oven door (up to end position).
2. Rotate the flaps of door hinges (in case of
conventional closing).
At COMFORT soft closing system, rotate the flaps
by 90°.
