EN 10
supply will be shut off automatically. Any chance of
gas leaking into the room is eliminated.
−
Always place the burner cap accurately on the
burner crown. Make sure the slots in the burner
crown are never blocked.
TIPS REGARDING YOUR COOKWARE
−
Correct choice of cookware allows optimum
cooking time and gas consumption. Cookware
diameter is the most important in this respect
−
If a pot or a pan is too small, the flames reaching
over the edge of its bottom will damage it.
Moreover, gas consumption will be higher.
−
If the pot or pan is too large, there is not enough
air and the burning efficiency is decreased.
Gas hob reducer
(only with some models) Use the
gas hob reducer when cooking in a container of
smaller diameter. Place it on the grid over the
auxiliary burner.
Burner type
Container diameter
Large (3,0 kW)
220-260 mm
Normal (1,9 kW)
180-220 mm
Auxiliary (1,0 kW)
120-180 mm
BURNER IGNITION AND OPERATION
Always press the knob before rotating it.
Cooking power levels are indicated on the knobs with
a large and a small flame symbol. Rotate the knob
over the large flame position ( ) to the small flame
position ( ) and back. Operating range is between
the two flame symbols.
Settings between ( ) and (
) are not recommeded.
In this range, the flame is unstable and may be
extinguished.
To turn off a burner, rotate the knob to the right
to position (
).
Single-handed ignition
To ignite a gas burner, press the corresponding knob
and rotate it to the maximum power position. Electric
spark from the spark plug will be activated and the
gas will ignite.
Two-handed ignition
To ignite a gas burner, press the corresponding knob
and rotate it to the maximum power position. Press
the spark plug button.
Electric spark from the spark plug will be activated
and the gas will ignite.
Electric ignition will only work if the power cord
is connected to the power mains. If electric ignition
does not work due to a power supply failure or damp
spark plugs, the gas can still be ignited with a match
or a lighter.
After ignition, keep the knob depressed for
approximately 5 more seconds until the flame is
stabilized.
If the burner does not ignite in 15
seconds, close it and wait for at least 1
minute. The, repeat the ignition
process.
If the flame on a burner is extinguished
(regardless of the reason), close the burner and
wait for 1 minute before trying to ignite it again.
