Gorenje ICE2000SP, Instruction Manual, Page: 37 / 138

37
OPERATING THE HOB WITH THE SENSOR BUTTONS
Product operating instructions
After inserting the plug into the socket, a “Beep” will be emitted and the indicator above the [On/Off]
key will start to flash, indicating the appliance is connected to power supply; this is referred to as standby
mode. Place a suitable piece of cookware on the center of the cooking zone. The display shows [----]
when [On/Off] key is pressed once. The appliance goes to selection mode and the indicator above the
[On/Off] key remains lit. Press the corresponding function keys to start operation. Stop the operation and
switch to standby mode by pressing the [On/Off] key after cooking.
Cooking Mode:
Power:
- Press the [function] key; the indicator lights up and the display shows [P8], indicating the default
power. Power can be adjusted by turning the Adjustment slide to the desired power level.
-
There are a total of 8 power levels (P1: 400 W, P2: 600 W, P3: 900 W, P4: 1200 W, P5: 1400 W,
P6: 1600 W, P7: 1800 W, P8: 2100 W).
- To choose another mode, press the [Function] key to switch to another cooking mode, or press the
[On/Off] key to stop the operation.
Temperature:
-
Press the [function] key until the indicator of [Temp] lights up. Display will show [200]°C, indicating the
default power of 1600 W. It can be adjusted using the slider.
- Set the desired power level.
- There are a total of 8 power levels (60
℃
, 80
℃
, 120
℃
, 150
℃
, 180
℃
, 200
℃
, 220
℃
, 240
℃
).
- To cancel this mode, press the [Function] key to switch to another cooking mode, or press the
[On/Off] key to stop the operation.
Child lock:
Press this key and hold it for 3 seconds to activate the lock. Press and hold the key for 3 seconds
to unlock.
Timer Function:
User can set the cooking time when specific cooking mode is selected. Press the [Timer] key once to
access the timer function. The [Timer] indicator on the left of the key will light up. Display will show the
default time [00:30]. Use the slider to set the desired time. To cancel this function, either press the
[On/Off] key to return to standby mode or hold the [Timer] key to resume the desired power or
temperature operation.
1. ON/OFF
2. Child Lock
3. Adjustment slide
4. Function Choices
5. Timer
6. Display