EN 18
LEVELLING THE APPLIANCE AND
ADDITIONAL SUPPORT
(depending on the model)
ADJUSTING THE HEIGHT OF THE
COOKER
(depending on the model)
The height of the cooker is 900 mm. You can adjust
the height of the appliance from 850 to 940 mm.
1. Put the cooker on the floor with back side.
2. Unscrew the screws, see arrows.
Torx T20
3. Set the desired height.
4. Screw the screws back together.
The cooker must be installed horizontally!
Follow these steps:
1. Rotate the height adjustment screws (see figure
1) to adjust the height of the cooker to the correct
position.
2. Adjust the wheels (see figure 2) by screwing them
with two screws at the front of the skirting board.
Check the horizontal position of the stove using a
spirit level.
3. Place the blind plugs into the holes in the front of
the skirting board (see Figure 3).
INSTALLATION OF THE LID
(depending on the model)
PREVENTION FROM TIPPING OVER
(mm)