EN 9
OVEN OPERATION WITHOUT TIMER
SETTINGS
−
After connecting the appliance to the power
mains for the first time or after a power supply
failure, time display symbol (4) will flash.
−
In order for the oven to operate, press the (A)
knob and hold it for two seconds. Time display
will stop flashing.
−
The oven can be used without restrictions if no
timer settings are made.
OVEN OPERATION WITH PROGRAM
TIMER SETTINGS
Program timer can be used to program oven
operation in two ways:
−
Setting the stop time
- the oven will stop
operating at the preset time.
−
Setting
delayed
start
-
the
oven
will
automatically start and stop operating at a preset
time.
SETTING THE STOP TIME
This mode allows you to set the time at which you
wish the oven to stop operating. The longest
possible setting is 15 hours from the current time.
−
Check if the clock is set accurately to current
time.
−
Select the (2) symbol by consecutively pressing
the (A) knob until the symbol starts to flash.
−
Rotate the (A) knob to set stop time.
−
Confirm the setting by pressing the (A) knob
again. Clock hands will move to time display. The
oven stop symbol will light up.
−
Switch on the oven (use the oven knobs to set the
−
operating mode and temperature). The oven will
start operate at the set time and stop and the
selected stop time.
−
When the clock reaches the selected stop time,
the oven will be switched off, which will also be
indicated by an intermittent acoustic signal. The
acoustic signal can be switched off by pressing
the (A) knob; otherwise, it will switch off
automatically after 1 minute. The symbol (2) will
flash. To continue cooking, press the (A) knob
and hold it for 2 seconds, and set a new cooking
time if necessary.
SETTING THE DELAYED START
This mode allows you to specify the time when the
oven should start to operate (cooking start time) and
the time when you wish the cooking process to stop
(end time). Stop time may be delayed by a
maximum
of 12 hours relative to the current time of day;
cooking duration may be set to a maximum of 3
hours.
−
Check if the clock is set accurately to current
time.
−
Setting the start time: Select the (1) symbol by
pressing the (A) knob. Rotate the (A) knob to set
the start time and confirm it by pressing the (A)
knob. The symbol for the end of operation will
start to flash (2).
−
Set the stop time: Rotate the (A) knob to set the
stop time and confirm it by pressing the (A) knob.
−
The clock hands will turn to clock display.
Symbols (1) and (2) will be lit up.
−
The timer will wait for the start of the cooking
process.
−
Set the oven
– use the oven knobs to set the
operating mode and temperature.
−
The oven will start to operate at the start time,
and stop operating at the stop time.
−
When the clock reaches the selected stop time,
the oven will be switched off, which will also be
indicated by an intermittent acoustic signal. The
acoustic signal can be switched off by pressing
the (A) knob; otherwise, it will switch off
automatically after 1 minute. The symbol (2) will
flash. To continue cooking, press the (A) knob
and hold it for 2 seconds, and set a new cooking
time if necessary.
SETTING THE MINUTE MINDER
The clock can also be used as a minute minder
which will sound an alarm upon expiry of a set
amount of time. The minute minder can only be
selected when the program timer is not programmed
or in use.
−
Select the (3) symbol by consecutively pressing
the (A) knob until the symbol starts to flash.
−
Rotate the (A) knob to set the time when you wish
the minute minder to sound the alarm. The
longest possible setting is 3 hours.
−
Confirm the setting by pressing the (A) knob
again. Clock hands will automatically turn to lock
display and the symbol (3) will be lit up.
−
When the time you set runs out, an intermittent
acoustic signal will be sounded. The acoustic
signal can be switched off by pressing the (A)
knob and holding it for 2 seconds; otherwise, it
will switch off automatically after 1 minute.
DISPLAYING THE SETTING
Whenever a timer function is set, you may check it
by pressing the (A) knob. The clock hands will briefly
move to the set value and then return to display the
current time.
DELETING A SETTING
Delete the setting by pressing the (A) knob and
holding it for 2 seconds. The symbol of the deleted
function will be switched off.