EN 17
Hold the door glass pane by the lower edge; slightly
lift it so that it is no longer attached to the support;
and remove it.
To remove the third glass pane (only with some
models), lift and remove it. Also remove the rubber
seals on the glass pane.
To replace the glass pane, observe the
reverse order. The markings (semicircle) on the door
and the glass pane should overlap.
Removing and inserting the oven door glass
pane
(depending on the model)
Screw out the screws on the door left and right sides
and pull out the upper lath. You can pull out the
glass pane of door now.
Provide these steps in reverse order at
returning the glass pane back.
TROUBLESHOOTING TABLE
Problem/error
Solution
The main fuse in
your home trips
often.
Call a service technician.
Make sure the power of all
appliances switched on does
not exceed the capacity of
the power mains in your
home.
The oven lighting
does not work.
The process of changing the
light bulb is described in the
chapter
"Cleaning
and
Maintenance".
The
food
is
underdone . . .
Did you choose the right
temperature
and
heating
system?
Is the oven door closed?
Repair or any warranty claim resulting from
incorrect connection or use of the appliance
shall not be covered by the warranty. In this
case, the user will cover the cost of repair.
INSTALLATION AND
CONNECTION INSTRUCTIONS
APPLIANCE PLACEMENT
(mm)
The walls or furniture adjacent to the appliance
(floor, rear kitchen wall, side walls) have to be
temperature-
resistant to at least 90°C.