EN
- 21
GONG-GALAXY.COM
INFLATION
1 - Choose a soft, clean surface to unroll your
material.
2 - Open the inflation Valve cap on the front of the
board.
3 -
Make sure the Valve knob is in the up
position for the inflation phase
. Just press
the button and turn it to the right or left. If you
do not follow this recommendation, the board will
deflate when removing the hose from the valve.
Before proceeding with your first inflation, tighten
the valve with the black key that comes in the
repair kit to insure perfect functioning (instructions
in WARNING).
4 - Insert the Pump hose by screwing it in a quarter
turn.
5 - Inflate to the required pressure which should be
between
15and20PSI
. It is normal to hear a
small whistling of air at the Pump hose during
inflation. Indeed, the tightness of the pipe is never
perfect, but the losses are insignificant. Likewise,
thePressureGaugeneedlewillonlybegin
tomovewhentheinternalpressureofthe
boardexceeds5PSI
: it is therefore normal that
it does not work from the first strokes Pump.
6 - Once the Board is inflated, disconnect the tip of
the pump, turning it a quarter turn and close the
Valve cap to seal it.
Inflate your Board with the
GONG
Pump supplied with your Board. This pump has
the required inflation capabilities, tips and seals compatible with the Valve of your
Board.
