F
ix the porter's exchange connector to the wall.
F
ix the porter's exchange.
Avoid to place the porter's exchange near to heating sources,
in dusty locations or smoky environments.
To install the porter's exchange directly over the wall, drill two
holes of Ø6mm. and use the supplied screws.
The upper part of the porter's exchange connector must
be placed at 1,60m. height roughly. The minimum
distance between the porter's exchange connector and
the closest object must be 5cm.
Place the porter's exchange at right angles to the
connector and align the attaching holes of the
porter's exchange with the attachment hooks
of the connector, as it is shown on the drawing.
Lock out the porter's exchange. Press the right
side till the attachment clip locks the porter's
exchange firmly.
To disassemble the porter's exchange from the
connector, use a plain screwdriver to release
the attachment clip. Remove the porter's
exchange from the connector, with special
attention do not falls.
11
PORTER'S EXCHANGE INSTALLATION
8
4
2
9
8
9
8
0
1
1
8
5
1
8
4
2
9
8
9
8
0
1
1
8
5
1
