reSIDENT LIST
NEW RESIDENT
enter BUS CODE
: 00000
0
2
0
1
0
0
0
9
0
4
3
0
0
enter CALL CODE
: 00000
0
_
enter name TO DISPLAY
settingS recorded
Continue
R
esident list menu.
NOTE: to make a call it will not be necessary to enter the zero placed on the left side
of the call code. For instance, if the call code is 000100, it will be enough to
enter 100 to make the call.
To enter into resident list menu, follow the
steps described on page 47
press OK when the display shows the
message
.
reSIDENT LIST
and
Allows to enter a new entry in the last resident list
position. To choose a specific position,
use the
menu.
Press OK to proceed: the display will show
the message
; key in the
monitor code and confirm by pressing OK.
A six digits code must be entered:
the three first digits will match the
internal building code and the three last
digits will match the monitor code.
In case of systems with one building only,
confirm that the door panel(s) has been
configurated with zero code.
IMPORTANT: if "Auxiliary Resident List" function
has been enabled (page 49), the display
will show the message
;
enter the six digits code that will be used
to call to this apartment.
Press OK to validate it.
To assign a text to this entry press OK and
proceed as described on page
.
Once the new entry has been recorded
the display will show the message
, and will return
to the initial screen. Repeat this procedure
to add as much entries as it is needed.
INSERT RESIDENT
enter CALL CODE
settings recorded
enter BUS CODE
54
PORTER'S EXCHANGE PROGRAMMING
16
