golmar 50124319, Instruction Manual

Page: 25 / 56

132
In Platea/Tekna Plus: On-Off push button. After any monitor reset and during the next 45
seconds, all the monitor functions will be disabled, with the exception of call reception.
In Platea/Tekna Uno: On-Off light indicator.
If the handset is on the craddle allows the activation of an optional second camera (*).If not,
allows to make an intercom call or to activate the second camera (*).
(Only Platea/Tekna Plus) .
If the handset is on the craddle allows the activation of an optional device. If not, allows to
call to a slave porter's exchange (*) or to activate the optional device (*).
(Only Platea/Tekna Plus) .
If the handset is on the craddle allows to see the picture from the master door panel. If not,
allows to establish audio and video communication with the door panel that has been
configurated with the autoswitch-on function. This function is disabled if a com-
munication is already established.
If the handset is on the craddle:
Platea/Tekna Plus: sends a panic call to the porter's exchanges that have enabled the
reception of this type of call.
Platea/Tekna Uno: keep pressing this button for 1 second to turn the monitor On/Off.
45 seconds after turning On the monitor only calls will be received.
If not: in both models allows to call to the master porter's exchange. During call reception
and communication progresses activates the lock release.
MONITOR DESCRIPTION
unction push buttons.
F
escription of the identification label.
D
For an easiest repair, replacement or increasement
of the existing monitors, fill the indentifying label
information.
MASTER: master monitor.
SLAVE: slave monitor.
INTER: slave monitor with intercom function.
A1: monitor connected to an auxiliary device.
CODE: monitor call code (see page 136).
STAIR: building code (see page 120).
CODIGO / CODE MASTER SLAVE INTER A1
ATENCIÓN
Alta tensión. No abrir la tapa.
Manipular sólo por personal
del servicio técnico.
WARNING
High voltage. Don't open cover.
Handle only by technical service.
PLATEA UNO
REF.
11784022
COD.
PUERTA
Door
ESCALERA
Stair
PISO
Floor
VERSIÓN Nº SERIE
00000000000 X.XX
131
CODIGO / CODE MASTER SLAVE INTER A1
ATENCIÓN
Alta tensión. No abrir la tapa.
Manipular sólo por personal
del servicio técnico.
WARNING
High voltage. Don't open cover.
Handle only by technical service.
PLATEA UNO
REF.
11784022
COD.
PUERTA
Door
ESCALERA
Stair
PISO
Floor
VERSIÓN Nº SERIE
00000000000 X.XX
a
f
g
b
e
j
l k
m
d
i
c
h
a.
b.
c.
d.
e.
f .
g.
h.
i .
j .
k.
l .
m. Handset.
B/W or color screen (depending on the model).
Front film (only Platea Plus).
Function push buttons (depending on the model).
Cord.
Attachment holes.
Identification label.
Connecting points.
CN4 connector (CN2 in Platea/Tekna Uno).
Three positions call reception volume control (only Platea/Tekna Plus).
Cable slot.
Contrast control (color control in case of color screen).
Brightness control.
MONITOR DESCRIPTION
escription of the Platea/Tekna Plus and Uno monitors.
D
Platea/Tekna Uno
push buttons
(*) Second camera activation and call to a slave porter's exchange functions require an internal
modification of the Platea/Tekna Plus monitor. If any of these functions are required, contact with
your nearest authorized distributor.
Second camera activation disables the intercomm function and call function to a slave porter's
exchange disables optional device function.