golmar 50124319, Instruction Manual

Page: 20 / 56

DOOR PANEL PROGRAMMING
128
IMPORTANT: the repertory content can be only transmitted between two equipments:
NEVER place more than one system in both transmission or reception modes.
It's possible that, during transmission, other of the installed equipments random
operates (call receptions, lock release activations, ...): that's normal.
It is possible to transfer the repertory content
to other panel or porter's exchange in the
same installation. Before to start with the
transmission, the receiving equipment
must be ready for reception (see next menu).
Press to start the transmission. The display
will show the message
sending...
and
the transmitted position number.
Once the transmission has been finished,
both equipments will exit from their
programming menues.
repertory:t
x
sending... 095
O.K.
Allows to receive the repertory content from
other panel or porter's exchange in the
same installation.
Press to start with the reception and place
the transmitter in transmission mode
(see previous menu). The display will show
the message
receiving...
and
the received position number.
Once the reception has been finished,
the receiving equipment will delete the rest
of its repertory and the message
deleting...
will be shown on the display.
Finally, both equipments will exit from their
programming menues.
repertory:r
x
receiving... 095
deleting...
O.K.
Coming from previous page
epertory menu.
R
End of the repertory. Use "UP" arrow key to move to the previous options.
Press to exit from the repertory menu and return to the main menu.
If is pressed twice the panel will exit from the programming menu.
127
DOOR PANEL PROGRAMMING
repertory:insert
repertory:modify
O.K.
O.K.
jose perez
:000012 :000041
inserting...
jose perez
:000012 :000041
Coming from previous page
O.K.
O.K.
repertory:delete
deleting...
O.K.
jose perez
:000012 :000041
O.K.
Continue
Allows to insert a new entry in a specific repertory
position. This function allows to keep the
repertory sorted.
Press : the display will show the first repertory
position: in case of no existing entries the
display will show the message
repertory
empty
. Use the arrow keys to find the
desired position and press : the new entry
will be inserted before theselected position.
Proceed as described on
repertory:new
menu.
Once the inserted entry has been recorded the
display will show the message
inserting...
while sorts the repertoy and will return to
the initial screen. Repeat this procedure
to insert as much entries as it is needed.
Allows to modify the details of an exisiting entry.
Press : the display will show the first repertory
position: in case of no existing entries the
display will show the message
repertory
empty
. Use the arrow keys to find the entry
to be modified and press .
Proceed as described on
repertory:new
.
Once the new entry has been modified
the display will show the message
settings recorded
, and will return
to the initial screen. Repeat this procedure
to modify as much entries as it is needed.
Allows to delete an exisiting entry.
Press : the display will show the first repertory
position: in case of no existing entries the
display will show the message
repertory
empty
. Use the arrow keys to find the entry
to be deleted and press .
The display will show the message
deleting...
Once the entry has been deleted, the display
will show the next entry. Repeat this procedure
to delete as much entries as it is needed.
epertory menu.
R