golmar 50124319, Instruction Manual

Page: 12 / 56

DOOR PANEL PROGRAMMING
120
onfiguration menu.
C
Continue
Coming from previous page
configuration
:000
panel address
modify value
:000
O.K.
:015
panel address
*
yes
general panel
*
yes
master panel
*
english
yes
panel w. camera
*
To enter into configuration menu, follow
the steps described on the previous page
and press when the display shows the
message
CONFIGURAtION
.
O.K.
O.K.
5 1 0
Allows to choose the language of the displayed
messages and the programming menues.
To choose a different language press
until the desired language will be displayed.
Each system must have one master panel only;
the rest of panels must be slave.
In systems with general entrance panel
configure as master one panel of each
internal building.
Press to change this value.
If this panel is a general entrance door panel
select YES.
Press to change this value.
Sets the building code. In buildings with
more than one panel, set them with the
same code; in systems with general entrance
panel, set 0 code for the general entrance
panel and a different code for each internal
panel (valid codes are from 1 to 255).
To change this value press : the display
will show the message
modify value
.
Key in the new building code and confirm
by pressing .
If is pressed the former value will be
restored.
Note: To visualize in the porter´s exchange the
general entrance door panel that has made
the call, contact with your distributor.
If this panel is a video door panel select YES.
Press to change this value in case of
audio door panel only.
119
DOOR PANEL PROGRAMMING
rogramming menu.
P
golmar
16:30
Access control options can be changed on
this menu. Press to enter into this menu.
access control
This menu allows to fill the repertory and
to change its options.
Press to enter into this menu.
repertory
Continue
pin code
pin:____
1 5 or 3 1 1 1 1 1
On this menu the system configuration options
can be changed.
Press to enter into this menu.
configuration
*
O.K. ANCEL
C
It will be necessary to enter into the programming menu to configure the system properties.
For a proper system operation, the menus marked with an
asterisk must be configurated.
Two different programming menues are available: installer , that allows to modifiy any of the
system properties and user , that only allows changes that do not affect the system operation.
Programming options with black text and white background are availables in both menues;
options with white text and black background are only availables on installer menu.
The first time you enter into the programming menu, the display messages will appear in spanish.
Press OK when the display shows the message
configuracion
: the display will show now
castellano
. Press OK to change to english or till the desired language appears.
If the option Direct Call Code (page 121) is disabled, it will not be necessary to fill the repertory
name for a proper system operation.
Use the arrow keys to move through the programming menu. Option changes will be validate
by pressing key, even if key is pressed later.
Use key to exit from the configuration menu. The door panel will automatically exit
from the configuration menu after 90 seconds with no operation.
To enter into the main programming menu,
press key symbol and enter
the installer PIN code (factory default: 1315)
or the user PIN code (factory default: 1111).