GOLFBOARD OWNER’S MANUAL
19
Read this owner’s manual.
Make sure you understand safety messages.
Understand and know how to operate all controls.
View and comprehend GolfBoard Safety Video.
Understand new user on-boarding procedures as explained in the supplemental section
at the end of this operating manual.
Before each subsequent ride, ensure that:
You don’t have alcohol or drugs in your system.
You are in good physical and mental condition.
3.2.1 Riding Gear
We recommend the following clothing items be worn when riding the GolfBoard for safety and
comfort.
Do not wear clothing that is too loose as there is a risk of getting it tangled on
wheels, steering, etc.
Closed toe shoes with non-slip soles are recommended.
Clothing that is
secure and fitting in a way that can’t catch on any components of the
GolfBoard (such as the stability bar) during use including when stepping on and off.
3.2.2 Stability Bar Installation
1.
First remove the attachment bolt on the mounting block near the traction deck of the
GolfBoard. Unscrew counter clockwise with a 6mm metric Allen key. Once fully unscrewed, pull
the screw completely out.
2.
Place the stability bar into the mounting block. The mounting stability bar should be
mounted with the bag mounting accessories facing outwards.
3. Replace the attachment screw on the mounting block and finger tighten. Once finger tight,
use the Allen key to tighten the bolt down securely to 30 Nm (22 foot-pound). Ensure that the
locking washer and flat washer are installed in the same orientation as when removed.
