GOLFBOARD OWNER’S MANUAL
18
3
GENERAL OPERATING INSTRUCTIONS
Read manual and safety warnings prior to riding.
Study and understand controls.
Turn key or f
lip switch to “ON” position (on remote also if applicable).
While vehicle is stopped, select forward or reverse direction.
Vehicle will start moving when accelerator is depressed.
Slowly depress accelerator trigger to increase speed.
To stop, release accelerator trigger and device will decelerate and stop.
Leave vehicle turned on during normal operation.
Park on flat terrain and to “OFF” when not in use (remote also if applicable).
3.1 LIFTING AND TRANSPORTING
The GolfBoard is equipped with a front and rear bumper. To avoid injury, the board is best lifted
by two people grasping both bumpers simultaneously. Do not attempt to lift a GolfBoard alone.
Do not lift the GolfBoard by its fenders, as they will crack or break.
The GolfBoard has been designed to be easily placed in the trunk of a car or back of a truck or
SUV. While transporting a GolfBoard, the board should be secured with high strength tie-down
straps, with one end secured to the board’s bumpers and the other end affixed to the vehicle.
Always check to make sure the board is fully secured before operating any moving vehicle.
3.2 GETTING READY TO RIDE
This section discusses what steps are required prior to riding the GolfBoard. This section also
includes important information about weight limits and loading of your GolfBoard.
Before first riding the GolfBoard we urge you to:
CAUTION
Failure to understand how to operate your GolfBoard or not following the instructions above
during operation may result in minor to moderate injury.
CAUTION
Failure to use proper lifting technique may result in minor to moderate injury.
CAUTION
Failure to properly secure your GolfBoard during transport may result in damage to the
GolfBoard, damage to the vehicle and/or minor to moderate injury to vehicle occupants.
