By pressing
we start the cooking process.
If you chose the function “Preheating/Cooling”
, the
combi-steam oven firstly evaluates the inside temperature. Should the
temperature be lower than desired, the combi-steam oven will then
preheat itself to a temperature 25% higher than the pre-set
temperature and upon reaching the temperature the combi-steam
oven shall produce an audio signal with a sign to place in the food.
Should the temperature be higher than the desired one, the combi-
stem oven will cool the inside to the desired temperature and upon
reaching the desired temperature will sound an audio signal with a
sign to place in food.
The cooking process according to the actual setting starts
automatically once the GN containers with food have been put in and
the door closed,
you do not need to press the “START” button.
e) Ending the manual operation and returning to the initial
menu
Follows automatically after the finish of the cooking process, after
elapse of the pre-set time, or upon reaching pre-set temperature
when using the core probe or after pressing the end icon.
f) Entering the finished cooking process to the programs
If you are happy with the result of the cooking process and assume
that you will repeat it with the same set parameters, you can enter the
steps and parameters of the finished cooking process as new program.
Upon the end of the cooking process an invite to save a new
process will appear. If you decide to do so, confirm the selection by
“Save as program”
The system will offer
“Programs”
Now you can enter the created program into a selected group, or
you can create your own group by pressing
“Select”
– the procedure
is described in detail in chapter “
Programming”
If you decide not to save the process as program, press “
Esc”.
If the cooking process parameters and steps are not saved as
program, they will be lost upon new manual mode setting or after
turning off the combi-steam oven!
14
OPERATION MANUAL FOR GOLDSTEIN VISION COOKING CENTRES
Summary of Contents for Vision
Page 1: ......
