GRINDER STRAIGHT HANDLE GH-10-28-O
OPERATION MANUAL
6
1
About this manual
This document is the original operation manual for the Grinder Straight Handle GH-10-28-O of PortaCo Inc., 1805 2nd Ave N,
Moorhead, MN 56560
The Grinder Straight Handle is used to remove excess weld on welding seams or rust on rails.
The Grinder Straight Handle is considered to be a complete machine according to the machinery directive 2006/42/EG.
The operation manual is intended to enable the operator to safely operate the system as intended and warn them of foreseeable
misuse. The manual is intended for the operating company´s specialized staff. In addition to the operation manual, the spare part
catalogue and the maintenance manual of the manufacturers of the individual components are to be observed.
WARNING
Operating errors using the device, e.g. by instruction errors, may lead to personal injury or damage to the
device.
-
The instruction for use must be accessible to operators and maintenance personnel at all times!
-
A copy of the technical documentation including the instruction for use must be kept in a suitable and
accessible place.
The explanation of the hazard pictograms is contained in chapter safety.
This document is to be treated as confidential. No portion of the document may be disseminated to another party or reproduced
without written permission from PortaCo Inc. All rights reserved.
