GRINDER STRAIGHT HANDLE GH-10-28-O
OPERATION MANUAL
7
2
General
This chapter contains basic information about the machine and is intended to provide an initial overview.
2.1
General information
Excess weld on welding seams or rust on rails can be removed with the Grinder Straight Handle made by PortaCo Inc.
The Grinder Straight Handle is hydraulically powered. The hydraulic power is provided by a hydraulic unit. The hydraulic unit is
not
[JB1]
part of the scope of delivery. We recommend the hydraulic power units D-23, E-15,
G-18, G-21, G-23 or G-31.
Use grinding wheels with an 8 inch diameter (20.32 cm) and a 1 inch thickness (2.54 cm). The grinding wheels must also be suited
for use at 3300 RPM.
Further design information is shown and described in chapter 4.
Regarding ergonomics, the stresses and strains resulting from the device are typical for a device in the construction industry.
Because the Grinder Straight Handle is considered to be a complete machine according to the machinery directive 2006/42/EG, an
identification plate (type plate) is attached.
Figure 1: Identification plate
